ZyXEL Communications IES-1248-51A - Disable PVC Upstream Limit Command Example; Enable PVC Upstream Limit Command Example; Set PVC Upstream Limit Command Example

Chapter 66 Virtual Channel Commands
IES-1248-51V User’s Guide
534
66.9.2 Enable PVC Upstream Limit Command Example
The following example turns on the limit for the default PVC on port 1 (VPI 0, VCI
33).
Figure 253 Enable PVC Upstream Limit Command Example
66.9.3 Disable PVC Upstream Limit Command Example
The following example turns off the limit for the default PVC on port 1 (VPI 0, VCI
33).
Figure 254 Disable PVC Upstream Limit Command Example
66.9.4 Set PVC Upstream Limit Command Example
The following example sets the limit for the default PVC on port 1 (VPI 0, VCI 33).
Figure 255 Set PVC Upstream Limit Command Example
ras> adsl uslimit enable 1 0 33
ras> adsl uslimit show 1
port vpi vci rate enable type
---- --- ----- ------- ------ -------
1 0 33 65535 V pvc
1 30 63 65535 - ipbpvc
1 31 64 65535 - ipbpvc
ras> adsl uslimit disable 1 0 33
ras> adsl uslimit show 1
port vpi vci rate enable type
---- --- ----- ------- ------ -------
1 0 33 65535 - pvc
1 30 63 65535 - ipbpvc
1 31 64 65535 - ipbpvc
ras> adsl uslimit set 1 0 33 10000
ras> adsl uslimit show 1
port vpi vci rate enable type
---- --- ----- ------- ------ -------
1 0 33 10000 - pvc
1 30 63 65535 - ipbpvc
1 31 64 65535 - ipbpvc