ZyXEL Communications IES-1248-51A - IGMP Group Statistics Command Example; IGMP Port Group Statistics Command Example; IGMP Port Info Statistics Command Example; IGMP Snoop Info Statistics Command Example

Chapter 58 IGMP Commands
IES-1248-51V User’s Guide
432
58.6.1 IGMP Snoop Info Statistics Command Example
This command displays the current IGMP settings and the number of IGMP-related
packets received.
58.6.2 IGMP Group Statistics Command Example
This command displays the information about IGMP groups learned on the system,
specified VLAN, or specified multicast address on the specified VLAN(s).
58.6.3 IGMP Port Info Statistics Command Example
The following figure shows the number of IGMP packets for port 1.
58.6.4 IGMP Port Group Statistics Command Example
The following figure shows an example for port 1.
statistics igmpsnoop port group
<portlist>
Displays the IGMP groups a port joins. M/L
Table 160 IGMP Snooping Statistics Command Summary (continued)
COMMAND DESCRIPTION P
ras> statistics igmpsnoop info
IGMP Snooping/Proxy is Disable
number of query = 0
number of report = 0
number of leave = 0
number of groups = 0
ras> statistics igmpsnoop group
[group info]
group vid port
--------------- ---- ------------------------------------------------ --
ras> statistics igmpsnoop port info 1
port group_cnt query_cnt join_cnt leave_cnt
----- --------- --------- --------- ---------
1 0 0 0 0
ras> statistics igmpsnoop port group 1
port vid mcast_ip source ip
----- ---- --------------- ---------------