ZyXEL Communications IES-1248-51A - VLAN Delete Command Example; VLAN Show Command Example; VLAN Statistics Commands

Chapter 56 IEEE 802.1Q Tagged VLAN and Isolation Commands
IES-1248-51V User’s Guide
415
2 Use the switch vlan1q vlan cpu command to set VID 3 as the management
VLAN.
56.3.9 VLAN Delete Command Example
The following example deletes entry 2 in the static VLAN table.
56.3.10 VLAN Show Command Example
The following example shows the settings for all VIDs.
56.4 VLAN Statistics Commands
VLAN statistics provide information about VLANs configured on the IES-1248-51V.
ras> switch vlan cpu set 3
ras> switch vlan delete 2
ras> switch vlan show *
vid name F:fixed X:forbidden N:normal U:untag T:tag
---- ---------------- ---------------------------------------------------
1 -
enabled 123456789012345678901234567890123456789012345678 12
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FF
UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UU
2 -
disabled 123456789012345678901234567890123456789012345678 12
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FF
UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UU
2000 -
enabled 123456789012345678901234567890123456789012345678 12
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FF
UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU UU
Table 149 Statistics VLAN Command Summary
COMMAND DESCRIPTION P
statistics vlan Displays current VLAN settings. M/L