ZyXEL Communications IES-1248-51A - Chapter 15 ENET Port Setup; ENET Port Setup

IES-1248-51V User’s Guide
117
CHAPTER 15
ENET Port Setup
The ENET Port Setup screen allows you to configure settings for the Ethernet
ports.
To open this screen, click Basic Setting > ENET Port Setup.
Figure 54 ENET Port Setup
The following table describes the labels in this screen.
Table 18 ENET Port Setup
LABEL DESCRIPTION
Port This is the port index number.
Active Select the check box to turn on the port. Clear it to disable the port.
Name Enter a descriptive name that identifies this port. You can use up to
31 ASCII characters; spaces are not allowed.