ZyXEL Communications IES-1248-51A - IP Bridge Domain VLAN Registration Command Example; IP Bridge Edge Router Commands; IP Bridge Edge Router Set Command Example

Chapter 62 IP Bridge Commands
IES-1248-51V User’s Guide
455
62.2.3 IP Bridge Domain VLAN Registration Command
Example
In the following example, VLAN 402 is added to domain “example3”.
62.3 IP Bridge Edge Router Commands
Use these commands to set up and maintain edge routers in an IP bridge.
Edge routers are usually the gateways that are provided to the subscribers. They
can also be gateways that are specified in static routing table entries. Each edge
router, in addition to its IP address, has an associated VLAN ID. When the IES-
1248-51V forwards a frame to an edge router, it uses this VLAN ID to replace
whatever VLAN ID the subscriber specified.
62.3.1 IP Bridge Edge Router Set Command Example
The following example creates edge router 192.168.1.244 with subnet mask
255.255.255.0 and VID 401.
ras> adsl ipbpvc domain vlan example3 402 join
Table 175 IP Bridge Edge Router Commands
COMMAND DESCRIPTION P
adsl ipbpvc edgerouter set
<ip-address>/<mask-bits>
<vlan-id>
This command creates an edge router with the specified IP
address, subnet mask, and VID. The IES-1248-51V uses
the VLAN ID when it forwards frames to the edge router. It
also uses the VLAN ID to identify the domain the edge
router is in.
H/H
adsl ipbpvc edgerouter show
[<vlan-id>]
Displays the edge routers for the specified VLAN or for all
VLAN.
M/L
adsl ipbpvc edgerouter delete
<ip-address> <vlan-id>
Deletes the edge router with the specified IP address and
VLAN ID.
H/H
ras> adsl ipbpvc edgerouter set 192.168.1.244/24 401