Chapter 45 VoIP
IES-1248-51V User’s Guide
335
45.5 Media Gateway Screen
Use this screen to configure the system’s H.248 media gateway (MG). Click VoIP
> Media Gateway. The following screen displays.
Figure 155 VoIP > Media Gateway
The following table describes the labels in this screen.
Modify This button appears when you are editing an existing profile. Click this to
save your changes.
Cancel Click this to set all fields in this screen to their last-saved values.
Table 116 VoIP > DSP Profile
LABEL DESCRIPTION
Table 117 VoIP > Media Gateway
LABEL DESCRIPTION
Enable Select this to activate the media gateway on the IES-1248-51V.
MG Name Enter a name for the media gateway (up to 31 ASCII printable characters;
spaces are not allowed).
Port Enter the service port number the IES-1248-51V uses to transmit and
listen to H.248 packets. The default is port 2944.
H.248 Profile Select the H.248 profile this media gateway is to use. The H.248 profile
defines the media gateway controller(s) associated with this media
gateway. Configure H.248 profiles in the Profile > VoIP H248 screen.
Status This field displays the current H.248 media gateway status.
Disable: This media gateway feature is disabled.
Registering: The IES-1248-51V is trying to register itself with the MGC.
Registered: The IES-1248-51V is registered with the MGC.
Unregistering: The IES-1248-51V is trying to cancel the registeration
with the MGC.
Unregistered: The media gateway is unregistered with the MGC.
Disconnected: The IES-1248-51V is unable to connect to the MGC.
Disabled by MGC: The IES-1248-51V has stopped the media gateway
service according to the MGC’s instruction.
To Next Page
Loading...