ZyXEL Communications IES-1248-51A - Default Settings

Chapter 71 Product Specifications
IES-1248-51V User’s Guide
583
71.3 Default Settings
This section lists the default configuration of the IES-1248-51V.
Table 232 Default Settings
VLAN Default Settings One VLAN is created (this is
also the management VLAN).
VID 1
Registration Fixed for the Ethernet and
ADSL ports
Tagging Untagged for all ports
ADSL Default Settings
Enable/Disable State Enabled
Operational Mode auto
(ADSL) Port Profile
Default Settings
Name DEFVAL
Profile Status Active
Latency Mode Interleave
Upstream ADSL Settings: Downstream ADSL Settings:
Max Rate 512 Kbps 2048 Kbps
Min Rate 64 Kbps 64 Kbps
Latency Delay 4 ms 4 ms
Max SNR 31 db 31 db
Min SNR 0 db 0 db
Target SNR 6 db 6 db
Up Shift Margin 9 db 9 db
Down Shift Margin 3 db 3 db
Name DEFVAL_MAX (Factory
Default)
Profile Status Active
Latency Mode Interleave
Upstream ADSL Settings: Downstream ADSL Settings:
Max Rate 512 Kbps 9088 Kbps
Min Rate 64 Kbps 64 Kbps
Latency Delay 4 ms 4 ms
Max Margin 31 db 31 db
Min Margin 0 db 0 db
Target Margin 6 db 6 db
Up Shift Margin 9 db 9 db
Down Shift Margin 3 db 3 db