ZyXEL Communications IES-1248-51A - Firmware File Upgrade

Chapter 69 Firmware and Configuration File Maintenance
IES-1248-51V User’s Guide
565
Enter the management password (1234 by default).
Use put to transfer the configuration file from the computer. The configuration file
on the system is named config-0.
Quit FTP.
Wait for the update to finish. The system restarts automatically.
69.4 Firmware File Upgrade
Use the following procedure to upload firmware to the IES-1248-51V.
Use an FTP client to connect to the IES-1248-51V.
Enter the management password (1234 by default).
Figure 264 Example: Enter the Management Password
Password: 1234
230 Logged in
Figure 265 Example: Upload the Configuration File config-0
ftp> put xxx.dat config-0
Figure 266 Example: Close FTP Client
ftp> quit
Figure 267 Example: Use an FTP Client to Connect to the IES-1248-51V
C:\> ftp <IES-1248-51V IP address>
Type your user name and press [ENTER].
User (172.16.11.86:(none)): admin
Figure 268 Example: Enter the Management Password
Password: 1234
230 Logged in