Chapter 53 Alarm Commands
IES-1248-51V User’s Guide
389
53.2.3 Alarm Port Set Command Example
The following example has the IES-1248-51V record only critical alarms on DSL
port 7.
53.2.4 Alarm Tablelist Command Example
The following example displays the supported minor level alarms for all alarm
categories, facilities, types of alarm messages and conditions.
53.2.5 Log Format
The following table describes the columns in the list.
ras> alarm port set 7 critical
ras> alarm tablelist
no alarm condition facility snmp syslog severity clearable
--- ----- ------------------------- -------- ---- ------ -------- -------
--
1 dsl ( 5000)line_up local1 V V info -
2 dsl ( 5001)line_down local1 V V minor V
3 dsl ( 5002)ad_perf_lol_thresh local1 V V minor V
4 dsl ( 5003)ad_perf_lof_thresh local1 V V minor V
5 dsl ( 5004)ad_perf_los_thresh local1 V V minor V
6 dsl ( 5005)ad_perf_lop_thresh local1 V V minor V
7 dsl ( 5006)ad_perf_es_thresh local1 V V minor V
8 dsl ( 5007)ad_perf_ses_thresh local1 V V minor V
9 dsl ( 5008)ad_perf_uas_thresh local1 V V minor V
10 dsl ( 5009)ad_atuc_loftrap local1 V V minor -
11 dsl ( 5010)ad_atuc_lostrap local1 V V minor -
12 dsl ( 5011)ad_atur_loftrap local1 V V minor -
13 dsl ( 5012)ad_atur_lostrap local1 V V minor -
14 dsl ( 5013)ad_atur_lprtrap local1 V V minor -
15 eqpt (10000)vol_err local1 V V critical -
16 eqpt (10001)temp_err local1 V V critical -
17 eqpt (10002)fan_err local1 V V critical -
18 eqpt (10003)hw_rtc_fail local1 V V critical -
19 eqpt (10004)hw_mon_fail local1 V V critical -
Press any key to continue, 'e' to exit, 'n' for nopause
Table 139 Log Format
LABEL DESCRIPTION
no This is the index number of the alarm entry in this list display.
alarm This is the category of alarms. eqpt represents equipment alarms. dsl
represents Digital Subscriber Line (DSL) alarms. enet represents
Ethernet alarms. sys represents system alarms.
To Next Page
Loading...