ZyXEL Communications IES-1248-51A - Voip Profile Dsp Delete Command Example; Voip Profile Dsp Map Command Example; Voip Profile Dsp Show Command Example; Voip Profile Dsp Set Command Example

Chapter 68 VoIP Commands
IES-1248-51V User’s Guide
553
68.7.1 voip profile dsp delete Command Example
An example is shown to delete a DSP profile named “digsig1”.
68.7.2 voip profile dsp map Command Example
The following example displays the subscribers that use a DSP profile named
“digsig3”.
68.7.3 voip profile dsp show Command Example
The following example shows the use of this command.
68.7.4 voip profile dsp set Command Example
The following example shows a command configuring a DSP profile named
“digsig4” with the following settings:
ras> voip profile dsp delete digsig1
ras> voip profile dsp map digsig3
1 2 3 4
123456789012345678901234567890123456789012345678
------------------------------------------------
VVVVVVVVVVVVVVVVVVVVVVVVVVVV
ras>
ras> voip profile dsp show
dsp profile(s)
-------------------------
1. DEFVAL
2. digsig4
ras> voip profile dsp show digsig4
name : digsig4
codec : g726-40 g726-32 g726-16
min. playbuffer : 30 ms
max. playbuffer : 90 ms
echotail : 64 ms
echocancel : on
vad : off
g711vpi : 20 ms
g723vpi : 30 ms
g726vpi : 20 ms
g729vpi : 20 ms
pbit : 7
dscp : 48