Chapter 51 Common Commands
IES-1248-51V User’s Guide
375
51.7 Statistics Port Command
Use this command to display or erase port statistics. The following example
displays port statistics for ADSL port 1.
See Chapter 9 on page 89 for details on the port statistics fields.
ras> statistics port 1
[adsl port 1]: G.bond group: test, master port 1
tx packets : 20
rx packets : 0
tx uni-packets : 1
rx uni-packets : 0
tx nonuni-packets : 19
rx nonuni-packets : 0
tx discard packets: 0
rx discard packets: 0
errors : 0
tx rate (bytes/s): 0
rx rate (bytes/s): 128
tx bytes : 5904
rx bytes : 0
To Next Page
Loading...