Chapter 46 Maintenance
IES-1248-51V User’s Guide
345
46.4 Backing Up a Configuration File
Backing up your device configurations allows you to create various “snap shots” of
your device from which you may restore at a later date.
Click Management > Maintenance, and do the following to save your device’s
configuration to your computer.
1 Right-click the Click here (Backup Text Configuration) link and click Save Target
As.
Or:
Click the Click here (Backup Text Configuration) link and then click File, Save
As.
2 In the Save As screen, choose a location to save the file on your computer from
the Save in drop-down list box and type a descriptive name for it in the File
name list box. Click Save to save the configuration file to your computer.
Note: See the chapters on commands to edit the configuration text file.
Note: You can change the “.dat” file to a “.txt” file and still upload it back to the IES-
1248-51V.
46.5 Load Factory Defaults
Use this function to clear all device configuration information you configured and
return to the factory defaults.
Note: Restoring the default configuration deletes all the current settings. It is
recommended to back up the configuration file before restoring the default
configuration.
To do this, click Management > Maintenance, Click here (Restore Default
Configuration).
Figure 162 Restore Default Configuration
To Next Page
Loading...