ZyXEL Communications IES-1248-51A - ADSL Name Command Example; ADSL Show Command Example

Chapter 64 ADSL Commands
IES-1248-51V User’s Guide
476
64.2.1 ADSL Show Command Example
The following example displays information on ADSL port 5.
64.2.2 ADSL Name Command Example
The following example sets ADSL port 5 to have the name super.
adsl ipbpvc route delete
<domain-name><ip>/<mask>
<nexthop>
Deletes route entry from specified domain.
nexthop:
H/H
adsl ipbpvc route runtime
[<domain-name>|<ip>/
<mask>|<domain><ip>/<mask>]
Displays the runtime route information. M/L
adsl ipbpvc route set <domain-
name><ip>/<mask><nexthop>
<metric> [<priority>]
Sets a new route to specified edgerouter for a given
domain. Maximum 16 routes in a domain.
metric:
priority:
H/H
adsl ipbpvc route show [<domain-
name>|<ip>/<mask>|<domain><ip>/
<mask>]
Displays current routing table for specific domain. M/L
adsl ipbpvc set <portlist><vpi>
<vci><ds-vcprofile[,us-
vcprofile]> <pvid> <priority>
<ipab_type>
Sets IP aware Bridge PVC.
pvid:
ipab_type:
H/H
adsl ipbpvc show [<portlist>
[<vpi><vci>]]
Displays IP aware Bridge PVC setting. M/L
Table 184 ADSL Commands (continued)
COMMAND DESCRIPTION P
Figure 178 ADSL Show Command Example
ras> adsl show 5
port enable mode up/downstream profile name
---- ------ -------- ------------- ---------------- ----------------
5 - auto 512/ 2048 DEFVAL -
Figure 179 ADSL Name Command Example
ras> adsl name 5 super