Chapter 58 IGMP Commands
IES-1248-51V User’s Guide
433
58.7 IGMP Query VLAN Commands
Use the IGMP query VLAN commands to configure the IES-1248-51V to query
VLANs as multicast group members.
58.8 Multicast VLAN Commands
Use these commands to configure VLAN multicast settings and set multicast port
members.
Multicast VLAN allows one single multicast VLAN to be shared among different
subscriber VLANs on the network. This improves bandwidth utilization by reducing
Table 161 igmpsnoop Command Summary
COMMAND DESCRIPTION P
switch igmpsnoop qryvid delete
<vid>
Deletes the specified IGMP query VLAN ID while the
IES-1248-51V is in IGMP proxy mode.
H/H
switch igmpsnoop qryvid set
<vid>
Creates the specified IGMP query VLAN ID while the
IES-1248-51V is in IGMP proxy mode.
H/H
switch igmpsnoop qryvid show Displays the IGMP query VLAN ID setting of the IES-
1248-51V.
M/L
To Next Page
Loading...