Chapter 3 Front Panel Connections
IES-1248-51V User’s Guide
57
Figure 12 Installed Transceiver
3.3.2 Transceiver Removal
Use the following steps to remove a mini GBIC transceiver (SFP module) from the
IES-1248-51V.
1 Remove the fiber-optic cables from the transceiver.
2 Unlock the transceiver’s latch (latch styles vary).
3 Pull the transceiver out of the slot.
4 Put the transceiver’s dust cover on the transceiver.
Figure 13 Opening the Transceiver Latch
Figure 14 Removing the Transceiver
To Next Page
Loading...