ZyXEL Communications IES-1248-51A - Voip Profile H248 Delete Command Example; Voip Profile H248 Set Command Example

Chapter 68 VoIP Commands
IES-1248-51V User’s Guide
558
68.8.1 voip profile h248 delete Command Example
An example is shown to delete an H.248 profile named “bar”.
68.8.2 voip profile h248 set Command Example
The following example shows a command configuring an H.248 profile named
“h248example” with the following settings:
• Primary media gateway controller domain name: host1.domain1
• Primary media gateway controller port number: 2944
• Secondary media gateway controller domain name: host2.domain2
• Secondary media gateway controller port number: 2943
•Transport: TCP
• Encoding: short
• IEEE 802.1p tag: 5
•DSCP tag: 36
• Inactivity timer: 1000 ms
• Ephemeral termination prefix: TP/
• Softswitch: DEFVAL
• Voiceband Data (VBD) support: off
• Force version: H.248 version 2 (off)
voip profile h248 show
[h248-profile]
This command displays the settings of the specified
H.248 profile, or displays the settings of all H.248
profiles if none is specified.
L/L
Table 213 voip profile h248 Commands (continued)
COMMAND DESCRIPTION P
ras> voip profile h248 delete bar
ras> voip profile h248 set h248example host1.domain1 mgcport 2944 mgc2 on
host2.domain2 mgc2port 2943 transport tcp encode short pbit 5 dscp 36 it 100
prefix TP/ softswitch DEFVAL vbd off forcever off