Chapter 16 xDSL Port Setup
IES-1248-51V User’s Guide
137
Level Use the drop-down list box to select the priority queue (0 to 7) to add
to use for the PVC. 7 is the highest level.
Add / Modify Click Add / Modify to save member PVC settings for a PPVC.
In order to change a member PVC ‘s settings, just enter the PVC’s VPI
and VCI, and configure the settings you want. These settings replace
the PVC’s old settings when you click Add / Modify.
Clicking Add / Modify saves your changes to the IES-1248-51V’s
volatile memory.
The IES-1248-51V loses these changes if it is turned off or loses
power, so use the Config Save link on the navigation panel to save
your changes to the non-volatile memory when you are done
configuring.
Close Click Close to exit the screen without saving your changes.
Table 25 PPVC Setup, Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...