EasyManua.ls Logo

ZyXEL Communications IES-1248-51A - Page 292

ZyXEL Communications IES-1248-51A
654 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 38 IP Bridge
IES-1248-51V User’s Guide
292
IP
NetMask
This field displays the IP address and the number of bits in the subnet
mask that define the range of IP addresses to which this entry applies.
If the destination IP address of a packet is in this range, the IES-
1248-51V forwards the frame to the specified edge router.
Edge Router IP This field displays the IP address to which the IES-1248-51V forwards
frames if the destination IP address of a packet is in the specified
range. It displays “-” if the field does not apply to the entry (for
example, in entries created automatically by the IES-1248-51V).
Metric This field displays the “cost” of transmission for routing purposes. It
displays “-” if the field does not apply to the entry (for example, in
entries created automatically by the IES-1248-51V).
Priority This field displays the priority value (0 to 7) to add to incoming frames
without a (IEEE 802.1p) priority tag. It displays “-” if the field does
not apply to the entry (for example, in entries created automatically
by the IES-1248-51V).
Type This field indicates whether this entry is used for upstream traffic (U,
or uplink interface) or downstream traffic (D, or downlink interface).
By default, all entries are for downstream traffic, unless the edge
router is configured in the edge router screen (see Section 38.4 on
page 284).
Table 93 Current Routes (continued)
LABEL DESCRIPTION

Table of Contents