Chapter 56 IEEE 802.1Q Tagged VLAN and Isolation Commands
IES-1248-51V User’s Guide
411
switch vlan set <vid>
<portlist>:<F<T|U>|X|N>
[<portlist>:<F<T|U>|X> ...][name]
Adds or modifies an entry in the
static VLAN table.
vid: The VLAN ID [1 – 4094].
portlist: You can specify a single
port: <1>, all ports: <*>, a list of
ports: <1,3,enet1>, you can also
include a range of ports:
<1,5,6~10,enet1,enet2>.
F<T|U>: The <F> stands for a fixed
registrar administration control flag
and registers a <portlist> to the
static VLAN table with <vid>. For a
fixed port, you also have to specify
<T|U>, the tag control flag.
T: has the device add an IEEE
802.1Q tag to frames going out
through this port(s).
U: has the device send frames
out through this port(s) without
an IEEE 802.1Q tag.
X: This is the registrar
administration control flag. X
stands for forbidden and blocks a
<portlist> from joining the
static VLAN table with <vid>.
N: stands for normal and
confirms registration of the
<portlist> to the static VLAN
table with <vid>. This is used in
GVRP applications.
name: A name to identify the SVLAN
entry.
H/H
switch vlan frametype <portlist>
<all|tag>
Sets the specified xDSL ports to
accept VLAN tagged Ethernet
frames, or both tagged and
untagged Ethernet frames.
H/H
switch vlan cpu show Displays the management VLAN
(CPU). You can only use ports that
are members of this management
VLAN in order to manage the IES-
1248-51V.
M/
~
switch vlan cpu set <vid> Sets the management VLAN (CPU).
You can only use ports that are
members of this management VLAN
in order to manage the IES-1248-
51V.
H/
~
switch vlan delete <vlan-list> Deletes the specified VLAN ID entry
from the static VLAN table.
vlan-list: You can specify a single
VID: <1>, all VIDs: <*>, a list of
VIDs: <1,3>, you can also include a
range of VIDs: <1,5,6~10>.
H/H
Table 148 IEEE VLAN1Q Tagged VLAN Configuration Command Summary
COMMAND DESCRIPTION P
To Next Page
Loading...