Chapter 61 IP Commands
IES-1248-51V User’s Guide
448
The following is a list of general IP commands that help with the management of
the IP parameters.
Table 172 General IP Commands
COMMAND DESCRIPTION P
ip set <ip-address> [/mask-
bits]
Configures a static IP address for the IES-1248-51V
management through Ethernet and SFP ports. If you
don’t enter the subnet mask, the system automatically
computes one.
H/H
ip set dhcp
<enable|renew|release>
Enables DHCP client, has the DHCP server reassign a
new IP address or removes the current dynamic IP
address on the IES-1248-51V’s Ethernet and SFP ports
for management.
H/H
ip gateway <ip-address> Changes the default gateway (next hop). This tells the
IES-1248-51V where to send packets that have a
destination IP address that is not on the same subnet as
the IES-1248-51V’s IP address.
H/H
ip show Displays the current management IP settings. M/L
ip showall Displays the current management IP settings, the IES-
1248-51V’s routing table, and the IP Address Resolution
Protocol (ARP) table.
M/L
ip ping <ip-address> [count]
[voip]
Checks for network functionality by sending an echo
request to another IP host and waiting for the reply.
voip: use the VoIP interface.
M/L
ip route set <dest-ip>[/mask-
bits] <gateway-ip> [metric]
<name>
Defines a new, static IP forwarding route or edits an
existing one.
H/H
ip route set default
<gateway-ip> <metric> [voip]
Configures the default static IP forwarding route. H/H
ip route delete <dest-ip>[/
mask-bits]
Removes a static IP forwarding route. H/H
ip route show Displays the IES-1248-51V’s routing table. M/L
ip route flush Clears the routing table. H/~
ip arp show Displays the IES-1248-51V’s IP Address Resolution
Protocol (ARP) table. This is the list of IP addresses and
matching MAC addresses that the IES-1248-51V has
resolved.
M/L
ip arp flush Clears the IES-1248-51V’s IP Address Resolution
Protocol table.
H/H
statistics ip Shows the statistics for the CPU IP traffic. M/~
To Next Page
Loading...