Chapter 62 IP Bridge Commands
IES-1248-51V User’s Guide
466
vpi/vci This field displays the Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) the device is using. The VPI and VCI identify a channel
on this port.
interface This field displays the name of the interface the device is using.
vid This field displays the VLAN ID the device is using.
type This field indicates whether this entry is used for upstream traffic (U,
or uplink interface) or downstream traffic (D, or downlink interface).
By default, all entries are for downstream traffic, unless the edge
router is configured using the edge router commands (see Section
62.3 on page 455).
Table 180 IPB ARP Proxy Show Command Output (continued)
LABEL DESCRIPTION
To Next Page
Loading...