133D SYSTEMS, INC.
WARNING: THE OPERATOR MUST USE AN APPROVED VACUUM CLEANER TO CLEAN UP EXCESS MATERIAL.
3D SYSTEMS RECOMMENDS AN EXPLOSION-PROOF MODEL. CONTACT 3D SYSTEMS CUSTOMER SERVICE FOR
PURCHASING OPTIONS.
Finding Material Safety Information
Use the Material Safety Information table to locate references and contacts for information on important material safety topics. Read the
SDS of the material used for the specic precautions to be observed.
Material Safety Information
TOPIC REFERENCE / CONTACT
Standard industrial ventilation
practices
US: American Conference of Governmental Hygienists, Committee on Industrial
Ventilation
Europe: Maximale Arbeitsplatz Konzentration, January 1990
Housecleaning and prevention of
accumulation of explosive dust
concentrations
US: NFPA 484-2012: standard for combustible metals
Europe: directive 99/92/EC risk from explosive atmospheres and directive 2014/34/EU:
equipment and protective systems intended for use in potentially explosive atmospheres.
Material exposure US: Code of Federal Regulations, 29 CFR, section 1900.1000, available from
Superintendent of Documents, Government Printing Ofce, Washington, D.C. 20402
Europe: directive 99/92/EC risk from explosive atmospheres and directive 2014/34/EU:
equipment and protective systems intended for use in potentially explosive atmospheres.
Specic materials Safety Data Sheets (SDS) from 3D Systems, Inc.
US/Canada: Europe:
Mfgr. Contact: 3D Systems Corporation
333 Three D Systems Circle
Rock Hill, SC 29730 USA
3D Systems GmbH
Guerickeweg 9
D-64291 Darmstadt, Germany
Information Phone: 803.326.3900 or
Toll-free: 800.739.3669
Phone: (+49) 6151 357-0
Emergency 1.800.262.8200 - Chemtrec 1.703.741.5500 - Chemtrec (U.S.)
To Next Page
Loading...
Need help?
General
