503D SYSTEMS, INC.
Shutting Printer Down
Anytime the Build Module is removed from the printer, the printer should be shut down rst. Follow these steps to shut down printer:
2. Shut down the PC the same way any PC is shut down, select
Shut Down (2) under Start.
3. Turn off the 24 Volts (3).
4. Turn off the Main Power (4).
2
CAUTION: Do not turn off the 24 Volts before
shutting down DMP deposition.
CAUTION: Do not turn off the main power before
shutting down the computer.
3
4
1
1. Close DMP Control and DMP Deposition by clicking the
boxes for all two windows in the upper right corner (1).
To Next Page
Loading...
