3D Systems ProX DMP320 User Manual

353D SYSTEMS, INC.
Traceability of Slicing/Hatching Parameters
Once you have a job le, one can always trace back what actual hatching parameters were used. To nd this information:
1. Open the job in DMP Control.
2. Click on the far left bar to switch to the properties windows.
3. Select group.
4. Select part.
5. In the part property window locate the eld ‘SliceSettings’.
6. This will list the slice settings used to generate this part.

3D Systems ProX DMP320 Specifications

General

Brand	3D Systems
Model	ProX DMP320
Category	3D Printers
Language	English