3D Systems ProX DMP320 User Manual

423D SYSTEMS, INC.
Manual Operation
• This module lets the user perform manual movements and check the actuators and sensors. Note: the keyboard escape key acts
as a stop button for all movements
Coater Movements:
1 2 3 4 5 6
1. move coater to left end position
2. move coater left until button is released
3. move coater between left feed and build platform
4. move coater between right feed and build platform
5. move coater right until button is released
6. move coater to right end position

3D Systems ProX DMP320 Specifications

General

Brand	3D Systems
Model	ProX DMP320
Category	3D Printers
Language	English