3D Systems ProX DMP320 User Manual

723D SYSTEMS, INC.
Clean Laser Window
1. Clean the laser window from the bottom with the Dust Off spray
can. Keep the can in the upward position and don’t spray too
hard. This way, most of the dust is already removed.
2. Take a white optics cleaning cloth and form a small ball, as
shown.
3. Spray the cloth multiple times with the Optics Cleaning Fluid.

3D Systems ProX DMP320 Specifications

General

Brand	3D Systems
Model	ProX DMP320
Category	3D Printers
Language	English