303D SYSTEMS, INC.
DMP Control
This program is used to prepare the printjob. For example
bringing parts in to print, laying out the parts on the print
platform, changing parameters,… This program will also
be used to start the actual printjob when the printer has
been prepared with DMP deposition.
While it needs to be running on the machine pc to control
the laser and scanner during printing, it can be run
separately from a user pc to prepare the printjob remotely
and send it to a printer.
The Menu bar
• Add group: Add a group of parts
• Add parts: Add one part at a time
• ProductionWise:
The optional Production-Wise module allows user to:
• Start your serial manufacturing job in < 1 minute.
• Includes automatic individual ID tagging and serial
number generation.
• Centrally manage your serial manufacturing jobs.
• All with Traceability and Version Control
• SaveJob: Saves the job as a .lmj le
• CloseJob: closes the job
• Base plate: Lets the user change the printing plate
size
The program is build up out of the following components:
To Next Page
Loading...
Need help?
General
