373D SYSTEMS, INC.
Congure Automatic Job File Backup
Note: this paragraph is only applicable if you have purchased and installed this option.
In order to have this function working correctly, always place the job les in a subfolder of the C:\Data\Jobs folder on your machine. For
example.
• C:\Data\Jobs\Job 01
• C:\Data\Jobs\Job 02
• C:\Data\Jobs\J20151201
• C:\Data\Jobs\Test job for customer X
Never place a job le directly under the C:\Data\Jobs folder or in another folder on the computer.
When a job completes, you can have the machine automatically move your job le to a storage location (e.g. on the network). After a
couple of days, the job is automatically deleted from the machine workstation, keeping it clean.
To enable this option (perform on each machine):
1. Start DMP Control.
2. Select Admin > Congurations > Machine conguration.
3. Set the path to the (network) storage folder. Preferably use
an IP based address. Examples
• X:\Backups\Jobs
• \\10.2.100.3\BuildFiles
• \\PC1234\Job backup)
4. The machine will automatically create a subfolder based on
its serial number, e.g. …\LM 25\
5. The job folders will be placed in this directory.
6. Click Save and restart DMP Control and DMP Deposition.
7. You can test access to the job storage folder (after software
restart) via:
DMP Control > menu Admin > Open job storage network folder…
To Next Page
Loading...
Need help?
General
