653D SYSTEMS, INC.
6. The sieving station will start lling with argon. When the oxygen
sensor (5) is under 2% the engine will start and sieving will begin.
7. The unusable waste gets fed into the clear container and the
usable material is stored in the metal cylinder (7).
8. Dispose of the unusable material out of the clear container
according to local regulations.
9. The material in the reusable powder container can be poured
into powder bins (6) that attach to the bottom of the container.
To attach, align the grooves of the bin to the pins of the powder
container move the bin up and turn until it stops, the bin will then
move down a little and lock in that position. Now poor the powder
in the bin with the handle (7). When the bin is full, push the bin
up and turn the other way until you can move the bin completely
down and away. The powder in the bin can now be poored in the
feeds to be re-used.
5
6
7
To Next Page
Loading...
Need help?
General
