236 Parameters
51.28 Par table ver Displays the parameter table revision of the fieldbus adapter
module mapping file stored in the memory of the drive.
In format xyz, where x = major revision number; y = minor
revision number; z = correction number.
0x0000 … 0xFFFF Parameter table revision. 1 = 1
51.29 Drive type code Displays the drive type code of the fieldbus adapter module
mapping file stored in the memory of the drive.
0 … 65535 Drive type code of fieldbus adapter module mapping file. 1 = 1
51.30 Mapping file ver Displays the fieldbus adapter module mapping file revision
stored in the memory of the drive in decimal format. Example:
0x107 = revision 1.07.
0 … 65535 Mapping file revision. 1 = 1
51.31 D2FBA comm sta Displays the status of the fieldbus adapter module
communication.
Idle Adapter is not configured. 0
Exec.init Adapter is initializing. 1
Time out A timeout has occurred in the communication between the
adapter and the drive.
2
Conf.err Adapter configuration error: The major or minor revision code
of the common program revision in the fieldbus adapter
module is not the revision required by the module (see
parameter 51.32 FBA comm sw ver) or mapping file upload
has failed more than three times.
3
Off-line Adapter is off-line. 4
On-line Adapter is on-line. 5
Reset Adapter is performing a hardware reset. 6
51.32 FBA comm sw ver Displays the common program revision of the adapter module
in format axyz, where a = major revision number, xy = minor
revision numbers. z = correction letter.
Example: 190A = revision 1.90A.
Common program version of adapter module. 1 = 1
51.33 FBA appl sw ver Displays the application program revision of the adapter
module in format axyz, where: a = major revision number, xy
= minor revision numbers, z = correction letter.
Example: 190A = revision 1.90A.
Application program revision of adapter module. 1 = 1
No. Name/Value Description FbEq
To Next Page
Loading...
