ABB ACS850 - Page 43

The ACS850 control panel 43
Trying to restore a user set between different firmware versions
If you try to backup and restore a user set between different firmware versions, the
panel shows you the following alarm information:
6. Press to save the new value.
Press to return to the list of erroneous parameters.
7. The parameter value you chose is visible under the
parameter name.
Press when you have finished editing the
parameters.
Step Action Display
1. Restore operation starts normally.
2. Version check is also OK.
You can see on the panel that the firmware versions are
not the same.
You can scroll the text with keys and .
3. If the downloading is continued, the display shows a
message about it.
Step Action Display
SAVE
CANCEL
9501 Ctrl boardSupply
PAR EDIT
Internal 24V
CANCEL SAVE
00:00
[0]
LOC
READY
9501 Ctrl boardSupply
0
0
INCORRECT VALUE TYPE
9503
READY EDIT
PARAM ERRORS
LOC
9
00:00
Initializing param
restore operation
PAR BACKUP
LOC
00:00
FIRMWARE VERSION
UIFI, 2020, 0,
UIFI, 1010, 0,
OK
PRODUCT VARIANT
CANCEL CONT
VER CHECK
LOC
1
00:00
FIRMWARE VERSION
PRODUCT VARIANT
3
3
OK
CANCEL CONT
VER CHECK
LOC
2
00:00
Initializing param
restore operation
PAR BACKUP
LOC
00:00