ABB ACS880 - Page 436

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
- / real32See parameter 40.24 Set 1 internal setpoint 4.Set 2 internal
setpoint 4
41.24
Setpoint source 1 /
uint32
See parameter 40.25 Set 1 setpoint selection.Set 2 setpoint
selection
41.25
0.00 / real32See parameter 40.26 Set 1 setpoint min.Set 2 setpoint min41.26
32767.00 / real32See parameter 40.27 Set 1 setpoint max.Set 2 setpoint max41.27
0.0 s / real32See parameter 40.28 Set 1 setpoint increase time.Set 2 setpoint
increase time
41.28
0.0 s / real32See parameter 40.29 Set 1 setpoint decrease time.Set 2 setpoint
decrease time
41.29
Not selected / uint32See parameter 40.30 Set 1 setpoint freeze enable.Set 2 setpoint freeze
enable
41.30
Not inverted (Ref -
Fbk) / uint32
See parameter 40.31 Set 1 deviation inversion.Set 2 deviation
inversion
41.31
1.00 / real32See parameter 40.32 Set 1 gain.Set 2 gain41.32
60.0 s / real32See parameter 40.33 Set 1 integration time.Set 2 integration
time
41.33
0.000 s / real32See parameter 40.34 Set 1 derivation time.Set 2 derivation time41.34
0.0 s / real32See parameter 40.35 Set 1 derivation filter time.Set 2 derivation
filter time
41.35
0.0 / real32See parameter 40.36 Set 1 output min.Set 2 output min41.36
1500.0; 1800.0 (95.20
b0) / real32
See parameter 40.37 Set 1 output max.Set 2 output max41.37
Not selected / uint32See parameter 40.38 Set 1 output freeze enable.Set 2 output freeze
enable
41.38
0.0 / real32See parameter 40.39 Set 1 deadband range.Set 2 deadband
range
41.39
0.0 s / real32See parameter 40.40 Set 1 deadband delay.Set 2 deadband
delay
41.40
Not selected / uint16See parameter 40.41 Set 1 sleep mode.Set 2 sleep mode41.41
Not selected / uint32See parameter 40.42 Set 1 sleep enable.Set 2 sleep enable41.42
0.0 / real32See parameter 40.43 Set 1 sleep level.Set 2 sleep level41.43
60.0 s / real32See parameter 40.44 Set 1 sleep delay.Set 2 sleep delay41.44
0.0 s / real32See parameter 40.45 Set 1 sleep boost time.Set 2 sleep boost
time
41.45
0.0 / real32See parameter 40.46 Set 1 sleep boost step.Set 2 sleep boost
step
41.46
- / real32See parameter 40.47 Set 1 wake-up deviation.Set 2 wake-up
deviation
41.47
0.50 s / real32See parameter 40.48 Set 1 wake-up delay.Set 2 wake-up delay41.48
Not selected / uint32See parameter 40.49 Set 1 tracking mode.Set 2 tracking mode41.49
436 Parameters