Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
10.00 Hz / real32Defines the “at setpoint” limits for frequency control
of the drive. When the absolute difference between
reference (28.96 Frequency ref act 7) and actual
frequency (1.6 Output frequency) is smaller than 46.22
At frequency hysteresis, the drive is considered to be
“at setpoint”. This is indicated by bit 8 of 6.11 Main
status word.
Drive at setpoint
(
06.11
bit 8 = 1)
01.06
(Hz)
28.96
+
46.22
(Hz)
28.96
-
46.22
(Hz)
28.96
(Hz)
0 (Hz)
At frequency
hysteresis
46.22
- / -Limit for “at setpoint” indication in frequency control.
For scaling, see parameter 46.2.
0.00 ... 1000.00 Hz
10.0 % / real32Defines the “at setpoint” limits for torque control of
the drive.
When the absolute difference between reference (26.73
Torque reference act 4) and actual torque (1.10 Motor
torque) is smaller than 46.23 At torque hysteresis, the
drive is considered to be “at setpoint”. This is indicated
by bit 8 of 6.11 Main status word.
Drive at setpoint
(
06.11
bit 8 = 1)
01.10
(%)
26.73
+
46.23
(%)
26.73
(%)
26.73
-
46.23
(%)
0 (%)
At torque hysteresis46.23
- / -Limit for “at setpoint” indication in torque control. For
scaling, see parameter 46.3.
0.0 ... 300.0 %
1500.00 rpm / real32Defines the trigger level for “above limit” indication in
speed control. When actual speed exceeds the limit,
bit 10 of 6.17 Drive status word 2 is set.
Above speed limit46.31
454 Parameters
To Next Page
Loading...
