Chapter 1: Introduction
493-0736-11 (6-2) 11
Chapter 1
Introduction
This Configuration and Installation Manual provides all the information required
by trained installation and maintenance personnel to install the ECA06, ECA60,
ECA600 and EMA60 process controllers and to configure them for use by system
operators.
Chapter 2, Installation, describes the mechanical and electrical installation
procedures for the controllers.
Chapter 3, Configuration, is intended for trained personnel such as Process
Control Engineers or Instrument Technicians who configure the controllers.
It describes the operator interfaces and features available in the Configuration
Mode and describes all the configurable options available for each controller.
Chapter 4, Maintenance, contains maintenance instructions to ensure the
continued safe operation of the controllers.
Chapter 5, Technical Data, contains a summary of the features of the controllers.
Appendix A, Application Examples contains detailed configuration instructions
for some typical applications.
Appendix B, Error, Warning and Information Codes, lists all the error, warning
and information codes that may be encountered and describes the appropriate
operator action by maintenance personnel.
Appendix C, Configuration Tree Diagrams, contains complete Configuration
Menus for each controller.
Appendix D, Configuration Work Sheet, contains an example worksheet which
you can photocopy and use to plan configurations.
Appendix E, Communication, contains details of communication parameters and
settings.
To Next Page
Loading...
Need help?
General
