ABB ECA06 - 5 Technical Data; Type; Control Functions; Control Action

Chapter 5: Technical Data 5.1 Type
493-0736-11 (6-2) 201
Chapter 5
Technical Data
5.1 Type
• Electronic controller with configurable functions.
5.2 Control Functions
Selectable from:
• PID controller with fixed parameters (conventional controller).
• PID controller with continuously adaptive parameters settings.
• PID controller with gain scheduling (combined with adaptive control).
• pPI controller (for dead-time processes).
5.3 Control Action
• Direct or reversed.
5.4 System Functions
Selected by configuration, some functions can be selected during operation.
Operating Modes
• Normal Operation or Configuration, selected via the front panel.
• Auto/Manual/Forced Output/Tracking control selected via the front panel, an
external digital signal, or a remote computer.
• Computer/Local control, selected via the front panel or an external digital
signal.