ABB ECA06 - Startup

A.2 Temperature Control and Communication with COMLI Appendix A: Application Examples
226 493-0736-11 (6-2)
2Outputs → Digital Outputs → DO1 → Mode = PositiveLogic.
3Outputs → Digital Outputs → DO1 → Signal = DIC1[Status].
4Outputs → Digital Outputs → DO1 → Identity = Switch.
Configuration Complete
When Configuration is complete repeatedly press the Cancel key until you return
to Operator Mode.
Startup
The controller starts automatically as soon as you leave the configuration mode,
using the values you have just configured.
AO1: Ana Out 1
Identity
ValveControl
Cancel
OK
DO1: Dig Out 1
Mode
PositiveLogic
Cancel
OK
DO1: Dig Out 1
Signal
DIC1[Status]
Cancel
OK
DO1: Dig Out 1
Identity
Switch
Cancel
OK
ISP
0.0 °C