3.6 Setting the Configuration Chapter 3: Configuration
136 493-0736-11 (6-2)
Table 95 Deviation Alarm Outputs.
Note: The Deviation Alarm block is freely configurable.
Control
Combination
Setting combination to Cascade or DualLoop opens a second Control block for
configuration. Select Cascade when you want to connect the Control blocks in a
Master/Slave configuration. Select DualLoop when you want the Control blocks
to work independently.
Table 96 Control Parameters
Notes:
• For information about how to switch between indicated loops, refer to the
Operator’s Manual, section 4.8.
• The ECA600 comprises two loops. Hence, it has two sets of the parameters
described in the following section.
Outputs
Name Type
NegAlarm Digital
PosAlarm Digital
Alarm Digital
Parameters
Name Setting Unit
Combination SingleLoop, Cascade, DualLoop None
Available in
ECA06 ECA60 ECA600 EMA60
--X-
To Next Page
Loading...
