Appendix A: Application Examples A.1 Level Control with Feed Forward and Gain Scheduling
493-0736-11 (6-2) 219
Configuration Complete
When Configuration is complete repeatedly press the Cancel key until you return
to Operator Mode.
Startup
The controller starts automatically as soon as you leave the configuration mode,
using the values you have just configured.
The configuration task is always a part of the installation process. This task can
be significantly simplified if a Preset Configuration is used. Look at the preset
Configurations at the planning stage. They may give you ideas and help you find
the most efficient solution to your control problem. If you let the preset
Configurations influence your choice of solution and I/O you may save some
valuable time!
You may not find the perfect configuration for your application among the preset
configurations but choose the one closest to the solution you require and make the
necessary adjustments.
AO1
Identity
ValveControl
Cancel
OK
ISP
0.0 mvp
To Next Page
Loading...
