Chapter 5: Technical Data 5.11 Transmitter Power Supply
493-0736-11 (6-2) 207
5.11 Transmitter Power Supply
• 24 V d.c., 100 mA.
• Potentiometer feedback when three-state pulse output, maximum 20 mA at
650 Ω.
5.12 Environment
Ambient Operating Temperature
•+5 to +55°C.
Sealing Classification
• In accordance with IEC 529
• IP20 in all directions.
• Kit available for IP65 protection from the front in sealed panel.
5.13 Installation
Two options available:
• Flush mounting in panel with mounting plates IP65 with gasket.
• Front-inserted plug-in cassette available for connections with front inserted
controller unit.
5.14 Electrical Connections
• Terminal blocks to accommodate wire of maximum size 1.5 mm
2
.
5.15 Relevant Standards
The Controller meets the Low Voltage Directive LVD 73/23/EEC according to the
standard EN 61131-2, and meets the EMC directive EMC89/336/EEC according
to Immunity EN 50082-2 and Emission EN 50081-1.
To Next Page
Loading...
