3.6 Setting the Configuration Chapter 3: Configuration
166 493-0736-11 (6-2)
Output Functions
The available Output Functions (OF) are shown in the table below.
Table 121 Available Output Functions.
Analog
Value = Signal
This block has no actual functionality but merely transports the signal at the input
to the output.
To connect this analog signal to the system under control, one of the Analog
Outputs must be used in the Output column.
Two State Pulse
The Two State Pulse output is a pulse length modulated digital output. It has one
analog input, Signal, and one digital output Pulse. It also holds one parameter,
CycleTime.
Parameters
Name Value Unit
Type Analog
ThreeStatePulse
TwoStatePulse
SplitRange
None
Available in
ECA06 ECA60 ECA600 EMA60
XXX -
Signal
Analog
Valu e
Available in
ECA06 ECA60 ECA600 EMA60
-XX-
Signal
Two
State
Pulse
Pulse
PulseLength CycleTime
Signal
100
-----------------
×
=
To Next Page
Loading...
