Chapter 3: Configuration 3.6 Setting the Configuration
493-0736-11 (6-2) 137
Parameters
The Control block (CO) encapsulates PID control and related functions.
The following connections are permanently made to the Set Point block – they
cannot be changed:
• PVSignal – Process Value signal.
• SPSignal – Set Point signal.
• ESPMode – indicates whether an internal or an external Set Point is used.
Table 97 Control Inputs.
Table 98 Control Block Outputs.
Inputs
Name Connection
GainSchedulingSignal Off, Analog
FeedForwardSignal Off, Analog
Outputs
Name Type
DeltaU Analog
Available in
ECA06 ECA60 ECA600 EMA60
112-
Control
GainSchedulingSignal
FeedForwardSignal
DeltaU
To Next Page
Loading...
