Chapter 3: Configuration 3.6 Setting the Configuration
493-0736-11 (6-2) 195
If WriteEnable is set to On, the Communication Mode has no impact on a
supervisory system’s ability to write to the controller’s registers. The
Communication Mode simply locks the front panel.
Table 150 WriteEnable is On.
Refer to Appendix E for further details on communication.
Table 151 Communications Parameters.
Communication
Mode
Write Operations Operator Front Panel
Access
Local Possible Unrestricted
Computer Possible Restricted
Parameters
Name Setting Unit
Identity 1 ≤ Identity ≤ 247 None
RS-485BaudRate Off, 1200, 2400, 4800, 9600, 19200,
38400
Baud
RS-232BaudRate Off, 1200, 2400, 4800, 9600, 19200,
38400
Baud
ComProtocol COMLI, MODBUS RTU None
WriteEnable Off, On None
To Next Page
Loading...
