3.6 Setting the Configuration Chapter 3: Configuration
94 493-0736-11 (6-2)
This function can be used to select one input out of four or one input out of two
to be used as the output. When using two inputs the LSB input is used to select the
one to be copied to the output. When using four inputs both the LSB input and the
MSB input are used to make the selection. The function is summarised in the table
below.
Table 52 Select Function.
Table 53 Select Inputs.
Table 54 Select Outputs.
MSB LSB Value
False False Signal1
False True Signal2
True False Signal3
True True Signal4
Inputs
Name Connection
Signal1 Off, Analog
Signal2 Off, Analog
Signal3 Off, Analog
Signal4 Off, Analog
LSB Off, Digital
MSB Off, Digital
Outputs
Name Type
Value Analog signal
To Next Page
Loading...
