4 Repair
4.3.9. Replacement of Joint Balls
3HAC030005-001 Revision: -140
© Copyright 2006 ABB. All rights reserved.
Refitting
CAUTION!
Never use unnecessary force when refitting the springs. Only work on one side or the spring
will be overstressed.
Action Note
1. Refit the Joint Balls using Loctite 243. For the best
result use spray Activator (Loctite 7649) on the
stainless Joint Balls.
Tightening Torque 11 Nm.
2. Refit the Movable Plate. Described in section
Replacement of Movable Plate on
page 130.
3. Refit the Parallel Arms. Described in section
Replacement of Parallel Arms on
page 120.
Continued
To Next Page
Loading...
