4 Repair
4.4.3. Replacement of Ejector Unit
3HAC030005-001 Revision: -162
© Copyright 2006 ABB. All rights reserved.
4.4.3. Replacement of Ejector Unit
General
This section describes replacement of Ejector Unit.
DANGER!
Turn off all electrical power, hydraulic and pneumatic pressure supplies to the robot!
Also read the safety sections:
• Safety risks related to pneumatic/hydraulic systems on page 18
• Risks associated with live electric parts on page 20
• Safety risks during installation and service work on robot on page 15
Location
xx0700000545
Required Equipment and References
A Attachment
B Bracket
C Hexagon head screw, M8x35 (Steel 8.8-A2F)
D Ejector Unit
E Hexagon bolt with flange, M6 x 20 (A2 DIN6921)
Equipment Spare Part No. Note
Standard tools
Continues on next page
To Next Page
Loading...
