2 Installation and Commissioning
2.3.2. Transport
3HAC030005-001 Revision: -32
© Copyright 2006 ABB. All rights reserved.
2.3.2. Transport
General
This section describes how to transport the manipulator.
NOTE!
The transport shall be made by qualified personnel and should conform to all national and
local codes.
Transport position
Whenever the manipulator is transported, it must be in mounting position, it’s not allowed to
turn the manipulator up side down.
When air transport is used, the robot must be located in a pressure-equalized area.
xx0700000434
A Robot delivery box
B Securing point x3
C Robot delivery note
To Next Page
Loading...
