ABB IRB 360/3 - Orienting and Securing the Robot; Orienting and Securing the Robot on Page

2 Installation and Commissioning
2.4.5. Orienting and securing the robot
3HAC030005-001 Revision: -46
© Copyright 2006 ABB. All rights reserved.
2.4.5. Orienting and securing the robot
General
This section details how to orient and secure the robot at a horizontal level at the installation
site.
Illustration
xx0700000444
Required equipment
A Screw M12
B Bonded seal washer, rubber/metal
C Bushing
D Sealing
Equipment, etc. Spare part no. Note
Standard Tools Standard toolkit on page 196
Continues on next page