4 Repair
4.4.1. Replacement of Vacuum Hoses
1593HAC030005-001 Revision: -
© Copyright 2006 ABB. All rights reserved.
Required equipment
Removal
Refitting
Equipment Spare part no. Note
Standard tools
Spare hose set
Action Note
1. Open all straps.
2. Pull the hose out from the swivel.
3. Pull the hose out from the air filter.
Action Note
1. Mount a new hose on the swivel.
2. Fix the hose, do not tighten, against the three
clamps on the parallel arm.
3. Twist the hose and mount it on the air filter.
4. Adjust the hose.
5. Tighten the straps.
6. Make a small program (low velocity) and check that
the hose runs freely.
7. Mount a new hose on the swivel.
8. Fix the hose, do not tighten, against the three
clamps on the parallel arm.
Continued
To Next Page
Loading...
