3 Maintenance
3.3.3. Telescopic Shaft, Stainless, Axis 4
813HAC030005-001 Revision: -
© Copyright 2006 ABB. All rights reserved.
Required Equipment and References
Interval 500 h
Interval 4000 h
Required Equipment Spare Part No. Note
Shot lubricator
Grease Oil and Grease specification on page
199.
Telescopic Shaft Spare Parts, Telescopic shafts on
page 220
Standard tools Standard toolkit on page 196.
References
Spare Parts, Telescopic shafts on page 220
Replacement of Telescopic Shaft on page 133
Action Note
1. Check and retighten the set screws in the Universal
Joints.
2. Lubricate the linear bushing, using a shot lubricator.
3. If the linear bushing are worn out or if the backlash
is excessive, replace the Telescopic Shaft.
Described in section
Replacement of Telescopic Shaft
on page 133
Action Note
1. Change the Telescopic Shaft and the Universal
Joints
Replacement of Telescopic Shaft
on page 133
Continued
To Next Page
Loading...
