NoteAction
See the figure in Location of SMB
battery on page 183.
Put the battery unit into its recess while arranging
the SMB cables as shown in the figure.
4
See the figure in Location of SMB
battery on page 183.
Secure the SMB cover with its attachment screws.5
Detailed in Updating revolution
counters on page 326.
Update the revolution counter.6
DANGER
Make sure all safety requirements are met when
performing the first test run. These are further de-
tailed in the section DANGER - First test run may
cause injury or damage! on page 50.
7
186 3HAC033453-001 Revision: H
© Copyright 2009-2013 ABB. All rights reserved.
3 Maintenance
3.4.8 Replacing SMB battery
Continued
To Next Page
Loading...
